For Better Performance Please Use Chrome or Firefox Web Browser

Published Papers

 List of the Published Papers in Foreign Journals


 

 

1

Analysis of Blend Irregularities and Fiber Migration Index of Wool/Acrylic Blended Worsted Yarns by Using an Image Analysis Technique

Journal of Textile Institute, Vol. 94, No. 3, 2003, pp. 177-185

S. Shaeikhzadeh, M. Amani, H. Hasani

2

Determination of Handle of Knitted Fabric using an Objective Measuring Technique

Indian Journal of Fiber & Textile Research, Vol. 34, 2009, pp. 245-252

H. Hasani

3

Application of Multiple Linear Regression and Artificial Neural Network Algorithms to Predict the Total handle Value of Summer Knitted T-shirts

Indian Journal of Fiber & Textile Research, Vol. 35, 2010, pp. 222-227

H. Hasani, M. Shanbeh

4

Analysis of the Physical Fundamentals of an Objective Integral Measuring System for the Determination of the Handle of Knitted Fabrics

Fibers & Textiles in Eastern Europe, Vol. 17, No 6(77), 2009, pp. 70-75

H. Hasani, H. Planck

5

Application of Air-Jet Nozzle in Short Staple Siro-Spinning System

Journal of Textile Institute, Vol. 102, No. 1, 2011, pp. 14-18

A. Sherafati Nejad, S. Shaeikhzadeh, H. Hasani

6

Effect of the different processing stages on mechanical and Surface properties of cotton-knitted fabrics

Indian Journal of  fiber & Textile Research, Vol. 35, 2010, pp. 139-144

H. Hasani

7

Novel Method to Evaluate the Low-stress Shearing Behavior of Knitted Fabrics

Fibers & Textiles in Eastern Europe, Vol. 18, No.2 (79), 2010, pp. 70-72

H. Hasani

8

Optimizing Spinning Variables to Reduce the Hairiness of Rotor Yarns Produced from Waste Fibers Collected from Ginning Process

Fibers & Textiles in Eastern Europe,  Vol. 19, No. 3 (86), 2011, pp. 21-25

H. Hasani, S. Tabatabaei

9

Determining the Optimum Spinning Conditions to Produce the Rotor Yarns from Cotton Wastes

Industeria Textila, Vol. 61, No. 6, 2010, pp. 259-264

H. Hasani, D. Semnani, S. A. Tabatabaei

10

Surface Roughness Measurement of Weft Knitted Fabrics Using Image Processing

Fibers & Textiles in Eastern Europe,  Vol. 19, No. 3, 2011, (86) pp. 55-59

D. Semnani, H. Hasani, S. Behtaj, E. Ghorbani

11

A Mathematical Model to Compare the Handle of PLA and PET Knitted Fabrics After Different Finishing Stages

Fiber and Polymer,  Vol.12, No.3, 2011, 405-413

A. Avinc, A. Khodammi, H. Hasani

12

Modeling and Predicting the Breaking Strength and  Mass Irregularity of  Cotton Rotor Spun Yarns Containing Cotton Fiber Recovered from Ginning Process by Using Artificial Neural Network Algorithm

Journal of Modeling and Simulation in Engineering, Vol. 2011, No. 6 (ArticleID591905), 2011, pp. 1-8

M. Shanbeh, H. Hasani, S. Tabatabaei

13

Optimization of the Processing Variables to Produce the Elastic Core-spun Yarn by Siro Spinning System, Using SOM Neural Network

Industria Textila, Vol. 62, No.3, 2011, pp. 119-122

H. Hasani, D. Semnani, A. Shiasi

14

Simulation Approach to Investigate the Effect of the Jet Structure and Air Pressure on Performance of Siro-jet Spinning

Fibers & Textiles in Eastern Europe, Vol. 20, No.3(92), 2012, pp. 46-50

H. Hasani, M. Hassani

15

Grey Relational Analysis to Determine the Optimum process parameters for Open-end Spinning Yarns

Journal of Engineered fibers and fabrics, Vol. 7, No. 2, 2012, pp. 81-86

H. Hasani, S. Tabatabaei, G. Amiri

16

Regression Model for the Bagging Fatigue of Knitted Fabrics Produced from Viscose/Polyester Blended Rotor Yarns

Fibers & Textiles in Eastern Europe, Vol. 20, No. 4(93), 2012, pp. 67-71

H. Hasani, S. Hassanzadeh

17

Bagging Behavior of Different fabrics Structures knitted from blended yarns using image processing

Journal of Engineered fibers and fabrics, Vol. 7, No. 3, 2012, pp. 8-15

H. Hasani, S. Hassanzadeh, S. Behtaj

18

An Investigation into the Fatigue Behavior of Core-spun Yarns under Tensile Cyclic Loading

Journal of Engineered fibers and fabrics, Vol. 7, No. 4, 2012, pp. 95-103

M. Shanbeh, H. Hasani, F. Yusefimanesh

19

Measuring the Roughness of Knitted Fabrics by Analysis of the Surface  Signals Obtained from Image Processing

Indian Journal of Fiber & Textile Research, Vol. 38, No. 1, 2013, pp. 101-105

H. Hasani, S. Behtaj

20

Comparison of of Softened  Polylactic Acid and Polyethylene Terephthalate Fabrics Using KES-FB

Fibers & Textiles in Eastern Europe, Vol. 21, No. 3, 2013, pp.81-88

H. Hasani, A. Avinc, A. Khoddami

21

Analyzing the Effect of Fiber, Yarn and Fabric Variables on Bagging Behavior of Single Jersey Weft Knitted Fabrics

Journal of Engineered fabric and fiber, Vol. 8, No. 3, 2013, pp. 1-8

M. Karimian, H. Hasani, S. Ajeli

22

Investigation into Energy Absorption Capacity of Composites Reinforced by Three-Dimensional-Weft knitted Fabrics

Journal of Industrial Textiles, Vol.  43, No. 4, 2014, pp. 536-548

H. Hasani, S. Ajeli, R. Hessami, A. Zadhoush

23

Investigation into the Curling Behavior of Single Jersey Weft Knitted Fabrics and its Prediction using Neural Network Model

The Journal of the Textile Institute, Vol. 104, No. 5, 2013, pp. 550-561

S. Minapoor, S. Ajeli, H. Hasani, M. Shanbeh

24

Analyzing the Effect of Yarn and Fabrics parameters on Electromagnetic Shielding of Metalized Fabrics Coated with Polyaniline

The Journal of Industrial Textile, Vol. 3, No. 44, 2014, pp. 434-446

F. Yousefimanesh, H. Hasani, M. Mortazavi

25

Analysis and Prediction of the Noise Reduction Coefficient of Lightly needled Estabragh/polypropylene Nonwovens Using Simplex Lattice Design

The Journal of The Textile Institute, Vol. 105, No. 3, 2014, pp. 256-263

S. Hassanzadeh, M. Zarrebini, H. Hasani

26

Analysis of the Thermal Comfort and Impact Properties of the Neoprene-Spacer Fabric Structure for Preventing the Joint Damages

International Journal of Preventive Medicine, Vol. 4, No. 7, 2013, pp. 761-766

E. Ghorbani, H. Hasani, H. Rafian, B. Hashemi

27

Modeling of Heat Transfer for Interlock Knitted Fabric Using Finite Element Method

Indian Journal of Fiber and Textile Research, Vol. 38,  2013, pp. 415-419

H. Hasani, S. Ajeli, N. Nouri

28

Optimization and Prediction of the Pilling Performance of Weft Knitted Fabrics Produced from Wool/Acrylic Blended Yarns

Indian Journal of Fiber and Textile Research, Vol 39, March 2014, pp. 83-88

M. Rejali, H. Hasani, S. Ajeli, M. Shanbeh

29

Effect of Material and Fabric Parameters on Fatigue Value of WeftKnitted Fabrics

Indian Journal of Fiber and Textile Research, Vol 39(2), June 2014, pp. 130-134

N. Moazzeni, H. Hasani, M. Shanbeh

30

Numerical Modeling of Bagging Behavior of Plain Weft Knitted Fabric Using Finite Element Method

Indian Journal of Fiber and Textile Research, Vol 39, June 2014, pp. 204-208

N. Karimian, H. Hasani, S. Ajeli, H. Dibajian

31

An Investigation into the Effect of Fabric Structure and Yarn Twist Dirrection on the Curling Behavior of Single Jersey Weft Knitted Fabrics

Journal of Fashion Technology & Textile Engineering, Vol. 2, No. 1, 2014, pp. 1-6

H. Hasani, S. Ajeli, P. Kheirkhah, A. Pasandidehpour

32

Predicting the Hairiness and Coefficient of Variation of Elastic Core-spun Yarns Produced on Sirofil-Spinning System using Artificial Neural Network

Journal of Fashion Technology & Textile Engineering, Vol. 2, No. 2, 2014, pp. 1-5

H. Hasani, M. Shanbeh, F. Raeisi

32

An Investigation into Acoustic Properties of Lightly Needled Estabragh Nonwovens Using Taguchi Method

Journal of Engineered Fibers and Fabrics, Vol. 9, No. 3., 2014, pp. 19-27

S. Hassanzadeh, M. Zarrebini, H. Hasani

33

Optimizing the Physical Properties of Elastic-Woven Fabrics Using Grey Taguchi Method

Journal of the Textile Institute, Vol. 106, No. 5., 2015, pp. 814-822

H. hasani, R. Masaeli, M. Shanbeh

34

Evaluating the Acoustic Properties of Estabragh (Milkweed)/Hollow-Polyester Nonwovens for Automotive Applications

Textile Science and Technology, Vol. 4, No. 3., 2014, pp. 1-6

H. Hasani, M. Zarrebini, M. Zare, S. Hassanzadeh

35

Analysis and Prediction of the Noise Reduction Coefficient of Lightlyneedled Estabragh/polypropylene Nonwovens Using Simplex Lattice Design

Journal of the Textile Institute, Vol. 105, No. 3., 2014, pp. 256-263

S. Hassanzadeh, H. Hasani, M. Zarrebini

36

Modeling the Functional Compression Properties of Hand-knotted Carpets Using Factorial Design and Response Surface Methodology

Fibers and Polymers, Vol. 15, No. 9, 2014, pp. 1977-1984

S. M. Tabatabaei, M. Ghane, A. Zeinal-Hamadani, H. Hasani

37

Geometrical Arrangement in the Needle Loop of Multifilament Yarn using Genetic Algorithm

Journal of Engineered Fibers and Fabrics, Vol. 9, No. 4., 2014, pp. 140-147

R. Bakhshpour, S. Ajeli, H. Hasani, A. A. Asgharyan-Jeddi

38

Modeling the Performance Properties on Woolen Hand-knotted Carpets using Response Surface Methodology

Journal of Fashion Technology & Textile Engineering, Vol. 2, No. 3, 2014, pp. 1-7

S. M. Tabatabaei, M. Ghane, A. Zeinal-Hamadani, H. Hasani

39

Investigation into the Thermal Comfort Properties of Knitted Fabric Produced From Estabragh (Milkweed)/Cotton Blended Yarns

Journal of the Textile Institute, Vol. 106, No. 1., 2015, pp. 47-56

M. Bakhtiari, H. Hasani, M. Zarrebini, S. Hassanzadeh

40
Modeling the Moisture and Heat Transfer of Warp Knitted Spacer Fabrics Using Artificial Neural Network

Textiles and Light Industrial Science and Technology, Vol. 4, No. 1—June 2015

Ehsan Ghorbani, Mohammad Zarrebini, Hossein Hasani, Mohsen Shanbeh

41

Effect of Weft Knitted Polyester Fabric Structure on its Hydrophobicity after Fluorocarbon Finishing

Textiles and Light Industrial Science and Technology, Vol. 4, No. 1—June 2015

Sanaz Ghapanvari, Akbar Khoddami, Hossein Hasani

42  
43  
44  

 

تحت نظارت وف ایرانی